Breakaway cable and split ring

Plastic coated 3mm x 1m breakaway cable with split ring attachment

Colour: Fluorescent yellow

Breakaway cable and split ring

Plastic coated 3mm x 1m breakaway cable with split ring attachment

Colour: Red

Breakaway cable green with split ring for braked trailers

Plastic coated 3mm x 1 meter breakaway cable

Split ring one end and safety clip the other

For use on braked trailers and caravans

Designed to apply the brakes by the handbrake in the unlikely event of the trailer or caravan becoming detached from the towing vehicle

Cable colour: Green

Breakaway cable with quick fit and release carabiners each end

Plastic coated 2mm x 1m 

Colour: Red

Vehicle fixing plate

Suitable for part no: LMX717 (secondary coupling and safety cable)

Vehicle fixing plate

Suitable for part no: LMX717 (secondary coupling and safety cable) and LMX721 (breakaway cable)

Plug keeper for 7 pin trailer plug

Mounts on coupling

Universal plug keeper storage for 13 pin and 7 pin electrics

Trailer plug holder keeper for 7 and 13 pin trailer plugs

For 7 pin N & S plugs, but also reversible for new style 13 pin plugs

Reversible - simply twists round to suit which plug you have

Suitable for mounting on the top of trailer couplings

Angled to allow water to run out

Designed to store plug and prevent damage when not in use

Secondary coupling / safety cable for all unbraked trailers

500mm long secondary coupling or safety cable (total length including clip)

5mm diameter wire

Heavy duty spring clip

This secondary coupling cable is designed so that, in the event of seperation of the main coupling, the trailer will remain attached to the towing vehicle and the draw bar should be prevented from touching the ground

Full fitting instructions included

Secondary coupling and safety cable for all unbraked trailers

500mm long

Complete with trailer secondary coupling fixing bracket

Trailer secondary coupling 5 link safety chain for unbraked trailers

This secondary coupling chain is designed so that, in the event of seperation of the main coupling, the trailer will remain attached to the towing vehicle. It is a legal requirement for unbraked trailers up to 750kg

8mm chain

380mm total length

Connection to towing vehicle by placing ring over towball. Ring ID = 63mm (sized ti fit over towball)

At the opposite end 12mm bolt hole for permanent fixture to trailer

Galvanised for weather protection