Universal trailer spare wheel carrier for drawbars 50mm to 60mm 

Suitable for Erde, Daxara, Maypole and any other trailer with a 50mm to 60mm square drawbar

Allows a trailer spare wheel to be carried underneath the drawbar, keeping it out of the way yet still easily accessible in the event of a flat tyre

Easy to fit with full fitting instructions included

Note; Spare wheel not included

Breakaway cable with split ring one end and safety clip the other

Plastic coated 3mm x 1 meter

For use on braked trailers and caravans

Designed to apply the brakes by the handbrake in the unlikely event of the trailer or caravan becoming detached from the towing vehicle

Cable colour: Fluorescent / Hi Viz

Breakaway cable with split ring one end and safety clip the other

Plastic coated 3mm x 1 meter

For use on braked trailers and caravans

Designed to apply the brakes by the handbrake in the unlikely event of the trailer or caravan becoming detached from the towing vehicle

Cable colour: Red

Breakaway cable green with split ring for braked trailers

Plastic coated 3mm x 1 meter breakaway cable

Split ring one end and safety clip the other

For use on braked trailers and caravans

Designed to apply the brakes by the handbrake in the unlikely event of the trailer or caravan becoming detached from the towing vehicle

Cable colour: Green

Breakaway cable with carabiner clip each end

Plastic coated 1 meter cable

For use on braked trailers and caravans

Designed to apply the brakes by the handbrake in the unlikely event of the trailer or caravan becoming detached from the towing vehicle

Carabiner clip each end for quick release and fitting

Cable colour: Red

Vehicle fixing plate

Suitable for part no: LMX717 (secondary coupling and safety cable)

Vehicle fixing plate

Suitable for part no: LMX717 (secondary coupling and safety cable) and LMX721 (breakaway cable)

Plug keeper for 7 pin trailer plug

Mounts on coupling

Universal plug keeper storage for 13 pin and 7 pin electrics

Trailer plug holder keeper for 7 and 13 pin trailer plugs

For 7 pin N & S plugs, but also reversible for new style 13 pin plugs

Reversible - simply twists round to suit which plug you have

Suitable for mounting on the top of trailer couplings

Angled to allow water to run out

Designed to store plug and prevent damage when not in use

Trailer / caravan coupling skid plate 80mm

2 x 11mm fixing holes

Secondary coupling / safety cable for all unbraked trailers

500mm long secondary coupling or safety cable (total length including clip)

5mm diameter wire

Heavy duty spring clip

This secondary coupling cable is designed so that, in the event of seperation of the main coupling, the trailer will remain attached to the towing vehicle and the draw bar should be prevented from touching the ground

Full fitting instructions included

Secondary coupling and safety cable for all unbraked trailers

500mm long

Complete with trailer secondary coupling fixing bracket

Trailer secondary coupling 5 link safety chain for unbraked trailers

This secondary coupling chain is designed so that, in the event of seperation of the main coupling, the trailer will remain attached to the towing vehicle. It is a legal requirement for unbraked trailers up to 750kg

8mm chain

380mm total length

Connection to towing vehicle by placing ring over towball. Ring ID = 63mm (sized ti fit over towball)

At the opposite end 12mm bolt hole for permanent fixture to trailer

Galvanised for weather protection

Jockey wheel fixing kit for standard and medium duty jockey wheels

Allows jockey wheel clamps to be fitted without drilling the drawbar, this not only can potentially weaken the drawbar but also reduce the effect of galvanised areas

No drilling required

Robust steel construction

Clamps around the drawbar allowing easy repositioning

Accepts 34mm - 42mm - 48mm clamps with mounting holes M10 and 105mm to 110mm hole centres

The fixing kit is suitable for 50mm & 60mm square drawbars

Suitable for most trailers including Erde, Daxara and Maypole

For use with most standard - medium duty jockey wheels but not our heavy duty range

Rated to 150kg

Note: Clamp and jockey wheel not included

Easy-Fit jockey wheel clamp fixing kit for 80mm x 40mm drawbars

Allows jockey wheel clamp to be fiited without drilling the drawbar

Accepts 34mm - 42mm 48mm clamps

(Clamps not included)